Archive for May, 2008
Thursday, May 29th, 2008
What is a Mini Blinds?
What is a Mini Blinds?
The long horizontal slats are held one above the other by the rungs of ladder cords shaped like a ladder. The lower ends of the legs of the ladder cords are secured to the long rail under the slats. Their upper ends are attached to the drive rod in the housing, the elongated box above the slats. As the drive rod rotates, one leg of each ladder cord moves up while the other moves down, causing the angle of the slats to change. In one design, this rotation is achieved by pushing up or pulling down on a long handle called a tilt wand connected to the drive rod by a lever. Lift cords along the ladder cords are also attached to the rail. They pass through holes in the slats and into the housing above, where they go over pulleys, combine and exit through the cord lock. For safety it’s important that the lock always work. A downward pull on the main lift cord raises the slats by the cords pulling up the rail below the slats. The cord lock holds the main lift cord to keep the slats up until the cord is pulled to release the lock. The safety lock made the cord lock easier to use.
Popularity: unranked [?]
Friday, May 23rd, 2008
North Carlolina General Contract Terms for discount blinds Installation
North Carlolina General Contract Terms for discount blinds Installation
The Dize Company will complete on-site measurements within 10 to 18 days after request from the user. Contract Shading Systems will complete on-site measurements within 10 to 20 days after request from the user. In the event the on site measuring is not completed within the contracted time period, the contractor may be held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby.
It is important that agencies make the contract administrator aware of any measurement problems.
Popularity: unranked [?]
Friday, May 16th, 2008
Window Blind Blogs
Window Blind Blogs
Update: We are starting some new forums, blogs and sites, We are considering opening a Open Source Forums at Adison U, any feedback on the idea of doing this and your comments on if you would participate are welcome. We also have opened a Ecology Directory a technology forum. Any feedback on our sites will help.
Popularity: unranked [?]
Friday, May 9th, 2008
Invoicing for Mini Blinds Installation
Invoicing for Mini Blinds Installation
The contractor shall invoice at the actual installation cost of the , per location.The minimum installation charge shall apply only in cases where the installation cost of the blinds to go exceeds the minimum installation charge.
*Location is defined as one or more buildings within close proximity to one another requiring installation service. The minimum installation charge is not intended to apply to each building at a single location. When installation can be completed at more than one building, and it is not necessary for the installers equipment to be transported by vehicle between the installation sites, only one minimum installation charge should be applied.
Popularity: unranked [?]
Friday, May 2nd, 2008
Mini Blinds Contract Price Control
Mini Blinds Contract Price Control
There will be no provision in this contract for any increase or reduction in the contract prices for any installation for a state agency or public school without approval from the Division of Purchase and Contract.8. Substitutions
Substitutions are not permitted without prior written approval of this division. Failure of the contractor to comply with this requirement may result in the removal of the contractor from the contract.
Transportation Charges:
All goods shall be delivered FOB DESTINATION for all orders equal to, or greater, than the minimum order, when shipped to a single destination. Orders for less than the minimum order will be shipped prepaid, with transportation charges added to the invoice as a separate item. Transportation charges levied by the contractor for orders equal to, or greater than the minimum order, when shipped to a single destination, may be cause for removal of the contractor from the contract. In instances where the contractor makes partial shipments of an order to one destination which is equal to, or greater than, the minimum order, all shipments of the order shall be sent FOB DESTINATION with NO additional transportation charges.
Term Contract No. 870A
Popularity: unranked [?]