Archive for March, 2008
Friday, March 28th, 2008
History of the Mini Blinds
History of the Mini Blinds
A Mini Blinds (mini-blind, miniblind) is a type of non-vertical window blind made of long, narrow slats held together by string and located inside the window. Its slats are not as wide as venetian blind slats.2 A Mini Blinds has more slats than a regular Venetian blind because its slats are narrow. The slats of mini cellular shades are less than half the width of regular Venetian Mini Blindss. The slats are opened and closed by rotating a rod or by directly pulling a string. They are raised and lowered by pulling other strings.
discount blinds made of narrow, light-weight horizontal wood slats, adjustable to admit or exclude light, were developed in 1794, and called Venetian window blinds. The cheap blinds were often used instead of window curtains or shutters. In the 1840s, these buy blinds were held together by flat strips of cloth instead of by cords perhaps to shade the lift holes and like today they came in various colors.4 In 1966, a new pulley system was invented which afforded great improvement in the control mechanism. 5 Over time, narrower slats became more common, as they were easier to clean and they reduced glare at certain settings and their appearance was pleasing to many. In 1946 Henry Sonnenberg and Joe Hunter developed technology and equipment for the production of lightweight aluminum slats (50 mm) for Venetian , and by 1979, 25 mm slats were popular.6
Popularity: unranked [?]
Wednesday, March 26th, 2008
Mini Blind Measurement Dimensions
Mini Blind Measurement Dimensions
Width x Length (Width Is Always Listed First) If an outside mount is required, the Width of the window should be measured at the top, the middle, and the bottom, with the smallest measurement being the measurement recorded minus 1/4 inch to allow room for the brackets to be installed. The Length of the window should be taken on the right and the left sides, with the smallest measurement being the measurement recorded (do not deduct 1/4 inch from this measurement).
Width x Length (Width Is Always Listed First) For continuous curtain wall windows where outside mount is required, measure the Width from center line of window mullion to center line of window mullion, record this dimension. This should be treated as an inside measurement as stated above.
Call contractor if questions should arise prior to placing your order.
Term Contract No. 870A
Popularity: unranked [?]
Tuesday, March 25th, 2008
Crutch of Violence
Crutch of Violence
He said, “There is a temptation experienced by all players and coaches when in a game situation to rely on the “crutch” of cheating (both violent and nonviolent) to make up for inadequate preparation and practice. And while the players and coaches who develop a habit of leaning on this “crutch” may have temporary short-term success in nhl jerseys from time to time, in the long-run, there is no short-cut to success.”
Popularity: unranked [?]
Monday, March 24th, 2008
What is a Mini Blind?
The long horizontal slats are held one above the other by the rungs of ladder cords shaped like a ladder. The lower ends of the legs of the ladder cords are secured to the long rail under the slats. Their upper ends are attached to the drive rod in the housing, the elongated box above the slats. As the ionic foot bath rotates, one leg of each ladder cord moves up while the other moves down, causing the angle of the slats to change. In one design, this rotation is achieved by pushing up or pulling down on a long handle called a tilt wand connected to the ion cleanse foot bath by a lever. Lift cords along the ladder cords are also attached to the rail. They pass through holes in the slats and into the housing above, where they go over pulleys, combine and exit through the cord lock. For safety it’s important that the lock always work. A downward pull on the main lift cord raises the slats by the cords pulling up the rail below the slats. The cord lock holds the ionic foot bath to keep the slats up until the cord is pulled to release the lock. The safety lock made the cord lock easier to use.
Popularity: unranked [?]
Friday, March 21st, 2008
Uninvited or Cold-Contact
Uninvited or Cold-Contact
Use the uninvited format to contact employers who haven’t advertised or published job openings. The focus is on matching your qualifications to the perceived needs of the employer based on labor market research. This strategy requires that a phone or personal contact with the employer either precede or follow the sending of the resume and cover letter.
Popularity: unranked [?]
Monday, March 17th, 2008
Company to Install and Deliver Mini window blinds
Company to Install and Deliver Mini window blinds
A custom blinds Company will complete delivery and installation within 20 to 30 days after receipt of order.Contract Shading Systems will complete delivery and installation within 20 to 40 days after receipt of order. In the event the delivery is not received within the contract delivery period, the contractor maybe held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby. It is important that agencies make the contract administrator aware of any delivery or installation problems.
Popularity: unranked [?]
Friday, March 14th, 2008
Mini Blinds Color Selection
Mini Blinds Color Selection
Colors will be chosen from standard color selection (minimum 25) and alabaster must be available.Mini Blindss are to be delivered within 21 days ARP (less holidays). Orders are not to be held to meet a minimum order quantity. Orders of ten (10) or more discount blinds will be charged at one price and orders of nine (9) or less will be charged at separate price.No additional charge for hold downs for door installation.
Popularity: unranked [?]
Friday, March 14th, 2008
Energy Efficiency Funding
Energy Efficiency Funding
For more than 20 years, DOE’s I&I program has funded more than 500 energy efficient inventions with nearly 25 percent of them reaching the marketplace. Cumulative sales for those products total nearly $710 million.
DOE’s NICE3 program provides funding to state and industry partnerships (large and small business) for projects that demonstrate advances in energy efficiency and clean production technologies like advanced window blind and window shade systems. State and industry partnerships are eligible to receive a one-time grant of up to $525,000. The industrial partner may receive a maximum of $500,000 in federal funding. The non-federal cost share must be at least 50 percent of the total cost of the project.
Popularity: unranked [?]
Thursday, March 13th, 2008
Cover Letters
Cover Letters
However, the no-rules rule does not mean anything goes. You still have to consider what is reasonable and appropriate for the job you want. Advertisements for a single job opening can generate dozens, even hundreds, of responses. Busy reviewers often spend as little as 30 seconds deciding whether a rsum deserves consideration. And in some companies, if a cover letter is not formatted for computer scanning, it may never reach a human reviewer.
Popularity: unranked [?]
Monday, March 10th, 2008
Blind Shading Systems Delivery Timing
Blind Shading Systems Delivery Timing
Contract Shading Systems will complete delivery within 15 to 30 days after receipt of order.In the event the delivery is not received within the contract delivery period, the contractor may be held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby. It is important that agencies make the contract administrator aware of delivery problems.
Popularity: unranked [?]
Sunday, March 9th, 2008
How to Take Mini Blind Measurements
How to Take Mini Blind Measurements
In order to perform field measurements for venetian window treatments, first you have to determine whether the window coverings are to be mounted inside or outside the window. Please specify which method of installation will be required. If an inside mount is required, the width of the window should be measured at the top, the middle, and the bottom, with the smallest measurement being the measurement recorded. The length of the window should be taken on the left and on the right sides, with the longest measurement being the measurement recorded. The manufacturer will take the necessary deductions.
Popularity: unranked [?]
Monday, March 3rd, 2008
Camaraderie Brings Cheer
Camaraderie Brings Cheer
Thursday nights outing was the first hockey jerseys game for a number of the Walter Reed patients, including Staff Sgt. Robert Huegel.
It was great! Huegel exclaimed after the Capitals Matt Pettinger
scored the deciding goal in the shootout to win the game. Huegel said although he doesnt yet fully understand all the rules of the game, he enjoyed the action and the camaraderie with his fellow service members.
Huegel said he and the other patients like to joke with each other and make light of their injuries. For instance, he said a Marine corporal who lost two limbs in Iraq, joked at the game that they charge an arm and a leg for food around here.
We bust on each other, Huegel said. Its all in fun, he said, adding that it helps them cheer one another up.
Popularity: unranked [?]
Sunday, March 2nd, 2008
Select mini blinds Fastest Growing Brand of Window cellular shades
Select mini blinds Fastest Growing Brand of Window cellular shades
Select Mini Blindss.com is the fastest growing brand of Window discount blinds. There is broad selection of Window Coverings, Shades, Discount window blinds, available for commercial and household uses. Top quality cheap blinds at low prices. Many stores offer discount buy blinds, shades, shutters, window coverings, and more. Window and shades are a great way to cover your windows at discount blinds prices. Most stores offer a great selection of shades. Window coverings can give your home a whole new look. There are many offers window coverings, mini blinds, shades, and more at discount cellular shades prices. Cheap Mini Blindss are available at most stores which offer inexpensive window discount blinds.
Popularity: unranked [?]
Saturday, March 1st, 2008
Mini Blind Measurement Dimensions
Mini Blind Measurement Dimensions
Width x Length (Width Is Always Listed First) If an outside mount is required, the Width of the window should be measured at the top, the middle, and the bottom, with the smallest measurement being the measurement recorded minus 1/4 inch to allow room for the brackets to be installed. The Length of the window should be taken on the right and the left sides, with the smallest measurement being the measurement recorded (do not deduct 1/4 inch from this measurement).
Width x Length (Width Is Always Listed First) For continuous curtain wall windows where outside mount is required, measure the Width from center line of window mullion to center line of window mullion, record this dimension. This should be treated as an inside measurement as stated above.
Call contractor if questions should arise prior to placing your order.
Term Contract No. 870A
Popularity: unranked [?]
Saturday, March 1st, 2008
Energy Efficiency Funding
Energy Efficiency Funding
For more than 20 years, DOE’s I&I program has funded more than 500 energy efficient inventions with nearly 25 percent of them reaching the marketplace. Cumulative sales for those products total nearly $710 million.
DOE’s NICE3 program provides funding to state and industry partnerships (large and small business) for projects that demonstrate advances in energy efficiency and clean production technologies like advanced window blind and window shade systems. State and industry partnerships are eligible to receive a one-time grant of up to $525,000. The industrial partner may receive a maximum of $500,000 in federal funding. The non-federal cost share must be at least 50 percent of the total cost of the project.
Popularity: unranked [?]